Hi! In full disclosure, we may earn money from companies (like Amazon) mentioned in this post if you make a purchase through our links. Thanks in advance for the support!
Canton,Illinois Ductless Mini-Split Air Conditioning Installation
CALL NOW FOR A QUOTE:
1.855.920.1857
Ductless Mini Split AC Vs. Central Air
If you have ductwork in place, it pays to compare the pros and cons of mini-split units to more traditional central air conditioning units.
Ductless Mini Split AC Units
- Mini split systems present significant savings if you do not have ducts in place.
Mini-split systems are easier to install than central AC units.
Mini-splits can provide both AC and heat.
Ductless air conditioners are more energy-efficient than central AC units.
Some people think min split AC units are ugly and take away from the interior design. - Central Air
For the most consistent cooling throughout the home, central AC is the way to go.
If you do not have ductwork in place, your total installation cost will be very high.
The system can last up to 20 years with proper maintenance.
Central air conditioners can be less expensive to run after installation.
If you would like an estimate on installing a ductless mini-split heating and cooling system in CantonCALL:
CALL NOW FOR A QUOTE:
1.855.920.1857
Mini Split AC System Types
Choosing a mini-split ac system is usually a smart choice, but you still need to decide what type of mini-split system is right for you In general, there are two common types of mini splits:
- Single Zone
- Multiple Zone
Single zone units are less expensive, but are usually only used to cool a single room of your house. These are ideal for smaller spaces such as studio apartments.
However, multiple zone units are made to cool several areas within a home. These also tend to be more costly, as the capacity for these systems must be higher and more powerful.
If you would like an estimate on installing a single or multiple zone ductless mini-split heating and cooling system in 61520 Call: 1.855.920.1857
Range for Costs Associated With A Mini-Split Installation in Canton, Illinois
The process and materials associated with installing a ductless air conditioning system is the same no matter the project. However, like anything else the actual total cost will vary on the complexity of the job and labor costs in your area.
Here is a quick guide to help you understand the range of pricing for a mini-split installation throughout the U.S.
A ductless mini-split air conditioning system might cost $2,000 to $14,000.
They run at an average of $3,000 for a 12,000 BTU system. While a one-ton unit with one outdoor and one indoor component at 21 SEER rating runs $1,000 to $4,000 depending on the brand and type of indoor mount.
The cost of installing your system adds an additional $300 to $1,000 or more depending on the complexity of the installation.
In general, mini-split ac systems run about 30% more than a new ducted system and two times as much as a conventional window AC.
You may also need to install a concrete pad to mount the exterior unit for an additional cost and a dedicated electrical circuit for the added expense. Older homes may require an upgraded electrical panel costing 1100 to 2500, however, that could be the case for conventional systems as well.
If you would like an estimate on the specific cost of installing a ductless mini- split heating and cooling system in your home in 61520 area Call:
1.855.920.1857
Top Brands of Ductless AC’s
There are countless options when it comes to picking a ductless mini-split heating and cooling system, however, just like anything else, there are some well-known companies to choose from.
Some of the top brands are:
- Mitsubishi
- Daikin
- Panasonic
- Frigidaire
- Friedrich
- Lennox
- Samsung
- LG
- Senville
Each of these brands has different system options and configurations, such as the number of zones, budget options, and SEER (Seasonal Energy Efficiency Ratio) ratings.
To get more information and quote on installing any of these top Ductless Mini-Split AC Systems brands in 61520 Call:
1.855.920.1857
How Does The Average Ductless Mini-Split AC Installation Cost Compare To Conventional AC System Costs in 61520?
The cost of a mini-split air conditioner including installation changes depending on a few factors, including type, brand, and BTU of the unit; the cost of labor, and the complexity of the job.
Most of the times, if you are trying to add AC to a home or commercial property that doesn’t currently have ductwork and venting in place, it could} be more affordable to go with a ductless mini-split system.
If you would like an estimate on the cost of installing a ductless mini-split system in 61520 Call:
1.855.920.1857
Where Can You Install Mini Splits?
The spot of your mini split AC system should definitely be considered proceeding your purchase. Convienently , you can install your mini split AC system in a few different areas.
Mini splits can be attached to your ceiling or wall. Higher on the wall is often common, but as time has evolved, more homeowners are disguising them in the ceiling. If you choose to install your mini split AC unit in the ceiling, you can have it suspended, recessed or concealed. As you might imagine, recessed or concealed units are very popular for smaller units. The less noise in the room, the bigger it will feel.
If you would like an estimate on installing a single or multiple zone mini-split AC system in 61520 CALL: 1.855.920.1857
How Ductless Mini-Splits AC Systems Work
Like traditional ac systems, mini split AC systems move hot and cold air where you need it. During warmer weather, your mini split evaporator will take the hot air inside your house, move it to your condenser and release it outside. In the winter, the system can reverse the process and bring cold air outside.
Also, mini splits are also good for moving colder or warm air from one room to the other. For example, if your basement is always too cold, while your bedrooms are too warm, a min split can move cooler air from the basement to the upper level.
If you would like an estimate on installing a mini-split AC system in Canton Call 1.855.920.1857
How does Zoning Affect the Pricing on Mini-Split AC Installation
One of the factors that will dictate the price tag of your ductless air conditioning Installation is the number of zones your home require.
Each additional indoor unit can up labor rates by an additional $300 to $1,000. Each unit requires electrical and refrigerant lines run inside conduit attached to the exterior wall of the home.
If you would like an estimate on the specific cost of installing a ductless mini-split heating and cooling system in your home in Canton Illinois CALL:
1.855.920.1857
How much does a mini-split AC cost to run?
The cost of your ductless AC A ductless AC system operating costs will be determined by area, size of home, insulation, climate and external temperatures.
In general, it is typically anywhere from 20% to 60% more efficient than central air conditioning. To get the lowest operating costs install the most energy-efficient unit possible. This is denoted by the SEER (Seasonal Energy Efficiency Ratio) rating. The higher the SEER rating the more energy-efficient and cost-effective a ductless AC system is.
To get the best temperature control for your home, consider other home improvement projects like insulating your attic, and upgrading doors and windows.
If you would like an estimate on installing an energy-efficient ductless mini-split system in 61520 Call :
1.855.920.1857
Why Is Mini-Split System BTU Important? And What Do I Need?
Just like a traditional HVAC system, BTU’s determine the size of the area that a system can cool. Whether you are installing a conventional or mini-split system, you need to make sure that you are installing a heating and cooling system that can provide the temperature control the size of your space.
The only way to know exactly how many BTUs your unit needs to be is to consult with an HVAC contractor in your area, as it may depend on other factors like the placement of the unit, climate, insulation, etc. For a rough estimate, you can calculate 17 to 24 BTUs per square foot of the desired living space.
But here are general guidelines to give you an idea on the number of BTUs your ductless mini-split heating and cooling system may need to cover your property.
Area To Be Cooled (SF) Unit Size Capacity (BTUs Per Hour)
700 – 1,000 1.5 Tons 18,000
1,000 – 1,200 1.5 or 2 Tons 21,000
1,200 – 1,400 2 Tons 23,000
1,400 – 1,500 2 – 2.5 Tons 24,000
1,500 – 2,000 2.5 Tons 30,000
2,000 – 2,500 3 Tons 34,000
3,000 – 4,000 4 Tons 48,000
5,000+ 5 Tons 60,000
If you would like an estimate on installing an energy-efficient mini-split AC system in 61520 Call:
1.855.920.1857
The Ductless Mini-Split AC Installation Process
You may be wondering what it takes to install a Mini-Split AC System to see just how involved the process is. Now, realize that no-two installations are exactly the same. So, we couldn’t possibly layout an exact installation process for your house without knowing specifics of the job, like layout and placement of the unit.
But we can layout the general process for you so you can get an idea of what a typical installation entails. At a high level, this is what will have to be done to install a Mini-Split AC System.
- Install the condenser
- Add evaporator mount
- Mount the evaporator
- Connect the evaporator to the condenser
- Cover the lines
- Make final connections
Some areas may need a permit, please check with your local municipality to see if permits are required in Canton, Illinois. Or CALL 855.925.0760 for a QUOTE and more information on what a Mini-Split AC|Ductless AC|Ductless Mini-Split AC|Mini-Split AC System|Ductless Mini-Split AC System} installation project looks like for your home.
Disadvantages Of Ductless Mini Split AC Systems
Mini Split Systems have a lot of positives, but nothing comes without drawbacks. Something to think about is that it has been reported that these units can be less energy efficient than forced-air systems like central air conditioning.
Also, not all homes are a perfect fit for mini split AC Systems. You should consult a qualified HVAC contractor before deciding which type of heating and cooling system is right for you. They can assess your home’s configuration, the available space, and determine if a ductless system can be installed properly and efficiently.
Also, you need to understand if you are fine with the space and esthetic requirements of a mini-split system as well as the increased maintenance before making any decision.
If your living space’s temperature is hard to control, then investigating a ductless mini-split system potentially could be the answer to all your heating and cooling challenges. For far too long, improving your living space’s comfort was contigent on being able to run pricey HVAC vents throughout your property. Running ducts throughout your house raised the cost of installing central heating and cooling throughout your home, not to mention in some older houses it just was not feasible to run bulky duct work. Thanks to the advent of ductless mini-split AC systems, these concerns are a thing of the past. If you are looking to install a mini split ac system in the Canton, Illinois area, call 1.855.925.0760 now for a quote from local provider in Canton, IL.
CALL NOW FOR A QUOTE:
1.855.920.1857
Mini-Split System Sales Growth Is Slowing
Some larger VRF-style commercial systems are still growing at faster rates, but their numbers in the U.S. remain small at only 28,000 units per year.
A bright small bright spot for the segment can be seen with accelerated growth in denser urban areas.
Though the mini split ac segment has seen impressive growth rates in the U.S. since 2005, the growth rates have been softening recently and the biggest ductless segment (small, single zone systems) have not grown at all since 2010. These sales remain stable at about 260,000 units per year, or only about 4% of total unitary AC shipments.
CALL NOW FOR QUOTE: 855-920-1857
Providing Ductless AC Installation In Canton, Illinois
Also Serving Near By Cities
Visit our State By State Heating and Air Conditioner Company Directory
