Hi! In full disclosure, we may earn money from companies (like Amazon) mentioned in this post if you make a purchase through our links. Thanks in advance for the support!
Macon,Illinois Ductless Mini-Split AC Installation
CALL NOW FOR A QUOTE:
If your property’s temperature is uncomfortable, then a ductless mini-split system might be the answer to all your heating and cooling challenges. For far too long, upping your property’s comfort was dependent on being able to install expensive HVAC vents throughout your house. Installing ducts throughout your home heightened the cost of installing central air conditioning in your home, not to mention in some older properties it unfortunately wasn’t practical to run bulky duct work. Thanks to the invention of ductless mini-split AC systems, these problems are a thing of the past. If you are looking to install a mini split ac system in the Macon, Illinois area, call 1.855.925.0760 now for a quote from local provider in Macon, IL.
CALL NOW FOR A QUOTE:
Range for Costs Associated With A Mini-Split Installation in Macon, Illinois
The process and materials associated with installing a ductless air conditioning system is the same no matter the project. However, like anything else the actual total cost will vary on the complexity of the job and labor costs in your area.
Here is a quick guide to help you understand the range of pricing for a mini-split installation throughout the U.S.
A ductless mini-split AC can cost $2,000 to $14,000.
They run at an average of $3,000 for a 12,000 BTU system. While a one-ton unit with one outdoor and one indoor component at 21 SEER rating runs $1,000 to $4,000 depending on the brand and type of indoor mount.
Labor costs add an additional $300 to $1,000 or more depending on the complexity of the installation.
In general, ductless systems run about 30% more than a new ducted system and two times as much as a conventional window AC.
You may also need to install a concrete pad to mount the exterior unit for an additional cost and a dedicated electrical circuit for the added expense. Older homes may require an upgraded electrical panel costing 1100 to 2500, however, that could be the case for conventional systems as well.
If you would like an estimate on the specific cost of installing a mini-split AC system in your home in 62544 area Call:
How does Zoning Affect the Pricing on Mini-Split AC Installation
One of the factors that will influence the cost of your ductless AC Installation is the number of zones your home require.
Each additional indoor unit can increase labor rates by an additional $300 to $1,000. Each unit requires electrical and refrigerant lines run inside conduit attached to the exterior wall of the home.
If you would like an estimate on the specific cost of installing a mini-split AC system in your home in Macon Illinois CALL:
Advantages Of A Mini Split AC System
The first we already hinted at, homeowners who do not currently have ductwork in their homes, don’t have to worry about upgrading your existing home with the appropriate duct and ventilation work.
This will ultimately save you thousands of dollars. Also, since these ductless heating and air conditioning systems do not have to have a lot of complex wiring and tubing, they tend to take less time to install, lowering the average cost to install a mini-split AC system.
Another huge perk of a mini-split air conditioner is the fact that they can be customized to the home. For example, one condenser may have as many as four evaporators connected to it, all of which can serve different rooms around the home. These evaporators can be independently controlled, which is great for keeping electric costs down. For example, if a homeowner wants to cool a single spot in the home, all you have to do is shut off the evaporators to the in unwanted areas of the home.
Finally, unlike a window AC unit, give you extra peace of mind as they don’t have to be installed in a window, which can cause a common entry point for intrudors.
If you would like an estimate on installing a ductless mini-split heating and cooling system in 62544CALL 1.855.920.1857
Mini Split AC System Types
When choosing a mini-split AC system, homeowners need to decide which unit is best for them In general, there are two common types of mini splits:
- Single Zone
- Multiple Zone
Single zone units are less expensive, but are generally only used to cool a single area of your house. These are ideal for smaller spaces such as studio apartments.
However, multiple zone units are made to cool multiple spaces within a house. These also tend to be more costly, as the capacity for these systems must be higher and more powerful.
If you would like an estimate on installing a single or multiple zone mini-split AC system in 62544 Call: 1.855.920.1857
Disadvantages Of Ductless Mini Split AC Systems
Ductless AC Systems have a lot of to love, but nothing comes without its faults. One thing to consider is that it has been reported that these units can be less energy efficient than forced-air systems like central air conditioning.
Also, not all homes are well suited for mini split AC Systems. You should consult a qualified HVAC specialist before deciding which type of heating and cooling system is right for your home. They can assess your home’s configuration, the available space, and determine if a ductless system can be installed properly and efficiently.
Also, you should understand if you are fine with the space and esthetic requirements of a mini-split system as well as the increased maintenance before making any decision.
Why Is Mini-Split System BTU Important? And What Do I Need?
Just like a traditional HVAC system, BTU’s determine the size of the property that a system can cool. Whether you are installing a conventional or mini-split system, you need to make sure that you are installing a heating and cooling system that can provide the temperature control the size of your space.
The only way to know exactly how many BTUs your unit needs to be is to consult with an HVAC contractor in your area, as it may depend on other factors like the placement of the unit, climate, insulation, etc. For a rough estimate, you can calculate 17 to 24 BTUs per square foot of the desired living space.
But here are general guidelines to give you an idea on the number of BTUs your mini-split AC system may need to cover your living space.
Area To Be Cooled (SF) Unit Size Capacity (BTUs Per Hour)
700 – 1,000 1.5 Tons 18,000
1,000 – 1,200 1.5 or 2 Tons 21,000
1,200 – 1,400 2 Tons 23,000
1,400 – 1,500 2 – 2.5 Tons 24,000
1,500 – 2,000 2.5 Tons 30,000
2,000 – 2,500 3 Tons 34,000
3,000 – 4,000 4 Tons 48,000
5,000+ 5 Tons 60,000
If you would like an estimate on installing an energy-efficient ductless mini-split heating and cooling system in 62544 Call:
Providing Ductless AC Installation In Macon, Illinois
Also Serving Near By Cities