Hi! In full disclosure, we may earn money from companies (like Amazon) mentioned in this post if you make a purchase through our links. Thanks in advance for the support!
Phillipsburg,Kansas Ductless Mini-Split Air Conditioning Installation
CALL NOW FOR A QUOTE:
What is a SEER rating and How Does it Affect Cost?
The SEER, or Seasonal Energy Efficiency Ratio, change the final cost. The higher the SEER rating the more efficient the unit.
If you are someone that wants to keep their operating costs to a minimum or want to conserve energy then a higher SEER rating is the way to go. The higher ratings translate into lower energy costs but also higher unit prices. These ratings vary from the federally regulated minimum of 13 up to 26+. Trane heat pump mini-splits have ratings as high as 38. So, while picking a unit with higher SEER rating will increase the cost of the installation it will lower the cost of operation over the life of the mini-split AC system
If you would like an estimate on the specific cost of installing a ductless mini-split system with different SEER ratings, for your home in Phillipsburg Kansas; Call:1.855.920.1857
If your temperature is less than perfect, then thinking about a ductless mini-split system might be the answer to all your heating and cooling problems. For far too long, improving your house’s comfort was dependent on being able to run pricey HVAC vents throughout your house. Adding ducts throughout your living space increased the cost of installing central ac in your home, not to mention in some older properties it unfortunately was not practical to run bulky duct work. Thanks to the creation of ductless mini-split AC systems, these challenges are a thing of the past. If you are looking to install a mini split ac system in the Phillipsburg, Kansas area, call 1.855.925.0760 now for a quote from local provider in Phillipsburg, KS.
CALL NOW FOR A QUOTE:
Mini-Split AC Systems Sales Growth Is Slowing
Some larger VRF-style commercial systems are still growing at faster rates, but their numbers in the U.S. remain small at only 28,000 units per year.
A bright small bright spot for the segment can be seen with accelerated growth in denser urban areas.
Though the ductless segment has seen impressive growth rates in the U.S. since 2005, the growth rates have been declining recently and the largest ductless segment (small, single evaporator systems) have not grown at all since 2010. These sales remain stable at about 260,000 units per year, or only about 4% of total unitary AC shipments.
Why Is Mini-Split System BTU Important? And What Do I Need?
Just like a traditional HVAC system, BTU’s determine the size of the property that a system can cool. Whether you are installing a conventional or mini-split system, you need to make sure that you are installing a heating and cooling system that can provide the temperature control the size of your space.
The only way to know exactly how many BTUs your unit needs to be is to consult with an HVAC contractor in your area, as it may depend on other factors like the placement of the unit, climate, insulation, etc. For a rough estimate, you can calculate 17 to 24 BTUs per square foot of the desired living space.
But here are general guidelines to give you an idea on the number of BTUs your ductless mini-split heating and cooling system may need to cover your property.
Area To Be Cooled (SF) Unit Size Capacity (BTUs Per Hour)
700 – 1,000 1.5 Tons 18,000
1,000 – 1,200 1.5 or 2 Tons 21,000
1,200 – 1,400 2 Tons 23,000
1,400 – 1,500 2 – 2.5 Tons 24,000
1,500 – 2,000 2.5 Tons 30,000
2,000 – 2,500 3 Tons 34,000
3,000 – 4,000 4 Tons 48,000
5,000+ 5 Tons 60,000
If you would like an estimate on installing an energy-efficient ductless mini-split heating and cooling system in 67661 Call:
How much does a ductless mini-split AC cost to use?
The cost of your mini-split AC A ductless mini-split AC system operating costs will increase by area, size of home, insulation, climate and external temperatures.
In general, it is typically anywhere from 20% to 60% more efficient than central air conditioning. To get the cheapest operating costs pick the most energy-efficient unit possible. This is denoted by the SEER (Seasonal Energy Efficiency Ratio) rating. The higher the SEER rating the more energy-efficient and cost-effective a mini-split AC system is.
To get the best temperature control for your home, consider other home improvement projects like insulating your attic, and upgrading doors and windows.
If you would like an estimate on installing an energy-efficient ductless mini-split system in 67661 Call :
Most Reliable Brands of Ductless Mini-Split Systems
There are countless options when it comes to picking a ductless mini-split system, however, just like anything else, there are some well-known manufactures to choose from.
Some of the top brands are:
Each of these brands has different system options and configurations, such as the number of zones, budget options, and SEER (Seasonal Energy Efficiency Ratio) ratings.
To get more information and quote on installing any of these top Ductless Mini-Split Systems brands in 67661 Call:
Where Can You Install Mini Splits?
The location of your mini split AC system should definitely be thought of prior to purchase. Convienently , you can install your mini split AC system in various areas.
Ductless AC Units can be attached to your ceiling or wall. Higher on the wall is often common, but as of most recently, more homeowners are disguising them in the ceiling. If you choose to install your mini split AC unit in the ceiling, you can have it suspended, recessed or concealed. As you might imagine, recessed or concealed units are very popular for smaller units. The less noise in the room, the larger it will feel.
If you would like an estimate on installing a single or multiple zone ductless mini-split systems in 67661 CALL: 1.855.920.1857
Disadvantages Of Mini Split Systems
Ductless AC Systems have a lot of positives, but nothing comes without drawbacks. One thing to consider is that it has been reported that these units can be less energy efficient than forced-air systems like central air conditioning.
Also, not all homes are condusive for mini split AC Systems. You should consult a qualified HVAC contractor before deciding which type of heating and cooling system is right for your house. They can assess your home’s configuration, the available space, and determine if a ductless system can be installed properly and efficiently.
Also, you should understand if you are ok with the space and esthetic requirements of a mini-split system as well as the increased maintenance before making any decision.
How Ductless Mini-Splits AC Systems Work
Like traditional ac systems, mini split AC systems move hot and cold air where you need it. On hotter days, the mini split evaporator will remove the warm air inside your house, transport it to your condenser and release it outside. During cooler days, the system can reverse the process and bring cold air outside.
On top of that, mini splits are also do a good job of moving cooler or warmer air from one room to the other. For example, if your basement is always too cold, while your bedrooms are too warm, a min split can move cooler air from the basement to the bedroom.
If you would like an estimate on installing a ductless mini-split system in Phillipsburg Call 1.855.920.1857
Range for Costs Associated With A Mini-Split Installation in Phillipsburg, Kansas
The process and materials associated with installing a ductless air conditioning system is the same no matter the project. However, like anything else the actual total cost will vary on the complexity of the job and labor costs in your area.
Here is a quick guide to help you understand the range of pricing for a mini-split installation throughout the U.S.
A ductless mini-split air conditioning system might cost $2,000 to $14,000.
They run at an average of $3,000 for a 12,000 BTU system. While a one-ton unit with one outdoor and one indoor component at 21 SEER rating runs $1,000 to $4,000 depending on the brand and type of indoor mount.
Labor costs add an additional $300 to $1,000 or more depending on the complexity of the installation.
In general, mini-split systems run about 30% more than a new ducted system and two times as much as a conventional window AC.
You may also need to install a concrete pad to mount the exterior unit for an additional cost and a dedicated electrical circuit for the added expense. Older homes may require an upgraded electrical panel costing 1100 to 2500, however, that could be the case for conventional systems as well.
If you would like an estimate on the specific cost of installing a mini-split AC system in your home in 67661 area Call:
How Does The Average Ductless Mini-Split AC Installation Cost Compare To Conventional AC System Costs in 67661?
The cost of a ductless mini split ac factoring in installation will vary depending on a few factors, including type, brand, and BTU of the unit; the cost of labor, and the complexity of the job.
Most of the times, if you are trying to add AC to a house or commercial property that doesn’t currently have ductwork and venting in place, it may} be more affordable to go with a mini-split ac system.
If you would like an estimate on the cost of installing a ductless mini-split heating and cooling system in 67661 Call:
Mini Split AC System Types
Choosing a mini-split ac system is usually a smart choice, but you still need to decide what type of mini-split system is right for you In general, there are two common types of mini splits:
- Single Zone
- Multiple Zone
Single zone units are less expensive, but are generally only used to cool a single room of the home. These are ideal for smaller spaces such as studio apartments.
However, multiple zone units are meant to cool several rooms within a house. These also tend to be more costly, as the capacity for these systems must be higher and more powerful.
If you would like an estimate on installing a single or multiple zone ductless mini-split heating and cooling system in 67661 Call: 1.855.920.1857
Perks Of A Ductless Heating & Cooling System
The first we already hinted at, homeowners who don’t already have ductwork in their homes, do not have to worry about retrofitting your existing home with the needed duct and ventilation work.
This will ultimately save you lots of money. Also, since these ductless heating and air conditioning systems do not require a lot of complex wiring and tubing, they tend to take less time to install, reducing the average cost to install a mini-split AC system.
Another great aspect of a mini-split air conditioner is the fact that they can be installed to maximize your home. For example, one condenser may have as many as four evaporators connected to it, all of which can serve different rooms around the home. These evaporators can be individually controlled, which is helps electric costs down. For example, if a resident wants to cool a specific spot in the home, all you have to do is shut off the evaporators to the in unoccupied rooms.
Finally, unlike a window AC unit, give you extra peace of mind as they don’t have to be installed in a window, which can cause a common entry point for intrudors.
If you would like an estimate on installing a ductless mini-split system in 67661CALL 1.855.920.1857
Ductless Mini Split AC Vs. Central Air Conditioning
If you currently have ductwork in place, it pays to compare the pros and cons of mini-split units to more traditional central air conditioning units.
Ductless Mini Split AC Units
- Ductless AC units present significant savings if you do not have ducts in place.
Mini-split systems are easier to install than central AC units.
Mini-splits can provide both cooling and heating.
Ductless air conditioners are more energy-efficient than central AC units.
Some people think min split AC units are ugly and take away from the interior design.
- Central Air
For the most accurate cooling around the home, central AC is the way to go.
If you do not have ductwork in place, your total installation cost will be very high.
The system can last up to 20 years with proper maintenance.
Central air conditioners can be less expensive to run after installation.
If you would like an estimate on installing a ductless mini-split heating and cooling system in PhillipsburgCALL:
CALL NOW FOR A QUOTE:
The Ductless Mini-Split AC System Installation Process
You may be wondering what it takes to install a Mini-Split AC System to see just how involved the process is. Now, realize that no-two installations are exactly the same. So, we couldn’t possibly layout an exact installation process for your property without knowing specifics of the job, like layout and placement of the unit.
But we can layout the general process for you so you can get an idea of what a typical installation entails. At a high level, this is what will have to be done to install a Mini-Split AC.
- Install the condenser
- Add evaporator mount
- Mount the evaporator
- Connect the evaporator to the condenser
- Cover the lines
- Make final connections
Some areas may need a permit, please check with your local municipality to see if permits are required in Phillipsburg, Kansas. Or CALL 855.925.0760 for a QUOTE and more information on what a Mini-Split AC|Ductless AC|Ductless Mini-Split AC|Mini-Split AC System|Ductless Mini-Split AC System} installation project looks like for your home.
Providing Ductless AC Installation In Phillipsburg, Kansas
Also Serving Near By Cities