Hi! In full disclosure, we may earn money from companies (like Amazon) mentioned in this post if you make a purchase through our links. Thanks in advance for the support!
Bernardston,Massachusetts Ductless Mini-Split AC Installation
CALL NOW FOR A QUOTE:
How Ductless Mini-Splits AC Systems Work
Like central air conditioning systems, mini split AC systems move hot and cold air where you need it. In the summer, the mini split evaporator will take the warm air inside your house, transport it to your condenser and release it outside. During winter months, the system can reverse the process and bring cold air outside.
Furthermore, mini splits are also great for moving colder or hot air from one room to the other. For example, if the basement is always too cold, while your bedrooms are too warm, a min split can move cooler air from the basement to the bedroom.
If you would like an estimate on installing a ductless mini-split heating and cooling system in Bernardston Call 1.855.920.1857
What is a SEER rating and How Does it Affect Cost?
The SEER, or Seasonal Energy Efficiency Ratio, will influence the total cost. The higher the SEER rating the more efficient the unit.
If you are someone that wants to keep their operating costs to a minimum or want to conserve energy then a higher SEER rating is the way to go. The higher ratings translate into lower energy costs but also higher unit prices. These ratings vary from the federally regulated minimum of 13 up to 26+. Trane heat pump mini-splits have ratings as high as 38. So, while picking a unit with higher SEER rating will increase the cost of the installation it will lower the cost of operation over the life of the mini-split AC system
If you would like an estimate on the specific cost of installing a ductless mini-split heating and cooling system with different SEER ratings, for your home in Bernardston Massachusetts; Call:1.855.920.1857
The Ductless Mini-Split AC Installation Process
You may be wondering what it takes to install a Mini-Split AC System to see just how involved the process is. Now, realize that no-two installations are exactly the same. So, we couldn’t possibly layout an exact installation process for your house without knowing specifics of the job, like layout and placement of the unit.
But we can layout the general process for you so you can get an idea of what a typical installation entails. At a high level, this is what will have to be done to install a Ductless AC.
- Install the condenser
- Add evaporator mount
- Mount the evaporator
- Connect the evaporator to the condenser
- Cover the lines
- Make final connections
Some areas may need a permit, please check with your local municipality to see if permits are required in Bernardston, Massachusetts. Or CALL 855.925.0760 for a QUOTE and more information on what a Mini-Split AC|Ductless AC|Ductless Mini-Split AC|Mini-Split AC System|Ductless Mini-Split AC System} installation project looks like for your home.
Mini-Split System Sales Growth Is Slowing
Some larger VRF-style commercial systems continue to grow at higher rates, but their numbers in the U.S. remain a fraction of the market at only 28,000 units per year.
A bright small bright spot for the segment can be seen with accelerated growth in denser urban areas.
Though the mini split ac segment has put up impressive growth rates in the U.S. since 2005, the growth rates have been softening recently and the biggest ductless segment (small, single evaporator systems) have not grown at all since 2010. These sales remain stable at about 260,000 units per year, or only about 4% of total unitary AC shipments.
Advantages Of A Ductless Mini Split System
The first we already touched up, homeowners who do not already have ductwork in their homes, don’t have to worry about making your existing home with the appropriate duct and ventilation work.
This will ultimately save you thousands of dollars. Also, since these ductless heating and air conditioning systems don’t require a lot of complex wiring and tubing, they tend to take less time to install, reducing the average cost to install a mini-split AC system.
Another awesome quality of a mini-split air conditioner is the fact that they can be installed to maximize your home. For example, one condenser may have as many as four evaporators connected to it, all of which can serve different rooms around the home. These evaporators can be independently controlled, which is great for keeping electric costs down. For example, if a homeowner wants to cool just one area in the home, all you have to do is shut off the evaporators to the rest of the home.
Finally, unlike a window AC unit, give you extra peace of mind as they don’t have to be installed in a window, which can cause a common entry point for intrudors.
If you would like an estimate on installing a ductless mini-split heating and cooling system in 01337CALL 1.855.920.1857
How does Zoning Affect the Pricing on Mini-Split AC Installation
One of the factors that will influence the total cost of your mini-split AC Installation is the number of zones your home require.
Each additional indoor unit can up labor rates by an additional $300 to $1,000. Each unit requires electrical and refrigerant lines run inside conduit attached to the exterior wall of the home.
If you would like an estimate on the specific cost of installing a mini-split AC system in your home in Bernardston Massachusetts CALL:
Mini Split AC System Types
If you are looking to install a mini-split AC system, you will need to decide what type of system is best for your home. In general, there are two common types of mini splits:
- Single Zone
- Multiple Zone
Single zone units will save you money, but are most often only used to cool a single area of the home. These are ideal for smaller spaces such as studio apartments.
However, multiple zone units are meant to cool several areas within a home. These also tend to be more expensive, as the capacity for these systems must be higher and more powerful.
If you would like an estimate on installing a single or multiple zone mini-split AC system in 01337 Call: 1.855.920.1857
Why Is Mini-Split System BTU Important? And What Do I Need?
Just like a traditional HVAC system, BTU’s determine the size of the property that a system can cool. Whether you are installing a conventional or mini-split system, you need to make sure that you are installing a heating and cooling system that can provide the temperature control the size of your space.
The only way to know exactly how many BTUs your unit needs to be is to consult with an HVAC contractor in your area, as it may depend on other factors like the placement of the unit, climate, insulation, etc. For a rough estimate, you can calculate 17 to 24 BTUs per square foot of the desired living space.
But here are general guidelines to give you an idea on the number of BTUs your ductless mini-split heating and cooling system may need to cover your home.
Area To Be Cooled (SF) Unit Size Capacity (BTUs Per Hour)
700 – 1,000 1.5 Tons 18,000
1,000 – 1,200 1.5 or 2 Tons 21,000
1,200 – 1,400 2 Tons 23,000
1,400 – 1,500 2 – 2.5 Tons 24,000
1,500 – 2,000 2.5 Tons 30,000
2,000 – 2,500 3 Tons 34,000
3,000 – 4,000 4 Tons 48,000
5,000+ 5 Tons 60,000
If you would like an estimate on installing an energy-efficient ductless mini-split system in 01337 Call:
Biggest Brands of Ductless AC’s
There are countless options when it comes to picking a mini-split AC system, however, just like anything else, there are some well-known manufactures to choose from.
Some of the top brands are:
Each of these brands has different system options and configurations, such as the number of zones, budget options, and SEER (Seasonal Energy Efficiency Ratio) ratings.
To get more information and quote on installing any of these top Mini-Split AC Systems brands in 01337 Call:
How Does The Average Ductless Mini-Split AC Installation Cost Compare To Conventional AC System Costs in 01337?
The cost of a ductless mini split ac factoring in installation changes depending on a few factors, including type, brand, and BTU of the unit; the cost of labor, and the complexity of the job.
Most of the times, if you are trying to add AC to a house or commercial property that doesn’t currently have ductwork and venting in place, it might} be more affordable to go with a mini-split ac system.
If you would like an estimate on the cost of installing a ductless mini-split heating and cooling system in 01337 Call:
Ductless Mini Split AC Vs. Central Air Conditioning
If you already have ductwork in place, it pays to compare the pros and cons of mini-split units to more traditional central air conditioning units.
Ductless Mini Split AC Units
- Ductless AC units present significant savings if you do not have ducts in place.
Mini-split systems are easier to install than central AC units.
Mini-splits can provide both AC and Heat.
Ductless air conditioners are more energy-efficient than central AC units.
Some people think min split AC units are ugly and take away from the interior design.
- Central Air Conditioning
For the most accurate cooling throughout the home, central AC is the way to go.
If you do not have ductwork in place, your total installation cost will be very high.
The system can last up to 20 years with proper maintenance.
Central air conditioners can be less expensive to run after installation.
If you would like an estimate on installing a mini-split AC system in BernardstonCALL:
CALL NOW FOR A QUOTE:
Providing Ductless AC Installation In Bernardston, Massachusetts
Also Serving Near By Cities
Mini-Split AC Installation Bernardston, Massachusetts, 01337
Mini-Split AC Installation Greenfield, Massachusetts, 01301
Mini-Split AC Installation Charlemont, Massachusetts, 01339
Mini-Split AC Installation Turners Falls, Massachusetts, 01349
Mini-Split AC Installation Conway, Massachusetts, 01341
Mini-Split AC Installation Erving, Massachusetts, 01344
Mini-Split AC Installation Sunderland, Massachusetts, 01375
Mini-Split AC Installation Rowe, Massachusetts, 01367
Mini-Split AC Installation Orange, Massachusetts, 01364
Mini-Split AC Installation Deerfield, Massachusetts, 01342