Hi! In full disclosure, we may earn money from companies (like Amazon) mentioned in this post if you make a purchase through our links. Thanks in advance for the support!
Burnham,Maine Ductless Mini-Split AC Installation
CALL NOW FOR A QUOTE:
How Ductless Mini-Splits AC Systems Work
Like other air conditioning systems, mini split AC systems move hot and cold air where you need it. During summer months, your mini split evaporator will remove the warm air inside your house, transport it to your condenser and release it outside. During cold weather, the system can reverse the process and bring cold air outside.
Furthermore, mini splits are also do a good job of moving cold or warmer air from one room to the other. For example, if the basement is always too cold, while your bedrooms are too warm, a min split can move cooler air from the basement to the upper level.
If you would like an estimate on installing a ductless mini-split system in Burnham Call 1.855.920.1857
How does Zoning Affect the Pricing on Mini-Split AC Installation
One of the factors that will influence the total cost of your ductless air conditioning Installation is the number of zones your property require.
Each additional indoor unit can up labor rates by an additional $300 to $1,000. Each unit requires electrical and refrigerant lines run inside conduit attached to the exterior wall of the home.
If you would like an estimate on the specific cost of installing a ductless mini-split heating and cooling system in your home in Burnham Maine CALL:
Mini Split AC System Types
When choosing a mini-split AC system, homeowners need to decide which unit is best for them In general, there are two common types of mini splits:
- Single Zone
- Multiple Zone
Single zone units cost less, but are generally only used to cool one area of a home. These are ideal for smaller spaces such as studio apartments.
However, multiple zone units are meant to cool several spaces within a home. These also tend to be more expensive, as the capacity for these systems must be higher and more powerful.
If you would like an estimate on installing a single or multiple zone mini-split AC system in 04922 Call: 1.855.920.1857
Why Is Mini-Split System BTU Important? And What Do I Need?
Just like a traditional HVAC system, BTU’s determine the size of the area that a system can cool. Whether you are installing a conventional or mini-split system, you need to make sure that you are installing a heating and cooling system that can provide the temperature control the size of your space.
The only way to know exactly how many BTUs your unit needs to be is to consult with an HVAC contractor in your area, as it may depend on other factors like the placement of the unit, climate, insulation, etc. For a rough estimate, you can calculate 17 to 24 BTUs per square foot of the desired living space.
But here are general guidelines to give you an idea on the number of BTUs your mini-split AC system may need to cover your house.
Area To Be Cooled (SF) Unit Size Capacity (BTUs Per Hour)
700 – 1,000 1.5 Tons 18,000
1,000 – 1,200 1.5 or 2 Tons 21,000
1,200 – 1,400 2 Tons 23,000
1,400 – 1,500 2 – 2.5 Tons 24,000
1,500 – 2,000 2.5 Tons 30,000
2,000 – 2,500 3 Tons 34,000
3,000 – 4,000 4 Tons 48,000
5,000+ 5 Tons 60,000
If you would like an estimate on installing an energy-efficient mini-split AC system in 04922 Call:
If your temp is hard to control, then considering a ductless mini-split system might be the answer to all your heating and cooling concerns. For far too long, increasing your home’s comfort was dependent on being able to add expensive HVAC vents throughout your living space. Installing ducts throughout your home raised the cost of installing central air conditioning in your home, not to mention in some older homes it simply was not feasible to run bulky duct work. Thanks to the advent of ductless mini-split AC systems, these problems are a thing of the past. If you are looking to install a mini split ac system in the Burnham, Maine area, call 1.855.925.0760 now for a quote from local provider in Burnham, ME.
CALL NOW FOR A QUOTE:
The Ductless AC Installation Process
You may be wondering what it takes to install a Ductless AC to see just how involved the process is. Now, realize that no-two installations are exactly the same. So, we couldn’t possibly layout an exact installation process for your home without knowing specifics of the job, like layout and placement of the unit.
But we can layout the general process for you so you can get an idea of what a typical installation entails. At a high level, this is what will have to be done to install a Mini-Split AC System.
- Install the condenser
- Add evaporator mount
- Mount the evaporator
- Connect the evaporator to the condenser
- Cover the lines
- Make final connections
Some areas may need a permit, please check with your local municipality to see if permits are required in Burnham, Maine. Or CALL 855.925.0760 for a QUOTE and more information on what a Mini-Split AC|Ductless AC|Ductless Mini-Split AC|Mini-Split AC System|Ductless Mini-Split AC System} installation project looks like for your home.
Mini-Split AC Systems Sales Growth Is Declining
Some larger VRF-style commercial systems continue to grow at higher rates, but their numbers in the U.S. remain a fraction of the market at only 28,000 units per year.
A bright small bright spot for the segment can be seen with accelerated growth in denser urban areas.
Though the ductless segment has seen impressive growth rates in the U.S. since 2005, the growth rates have been softening recently and the biggest ductless segment (small, single zone systems) have not grown at all since 2010. These sales remain stable at about 260,000 units per year, or only about 4% of total unitary AC shipments.
Providing Ductless AC Installation In Burnham, Maine
Also Serving Near By Cities