Hi! In full disclosure, we may earn money from companies (like Amazon) mentioned in this post if you make a purchase through our links. Thanks in advance for the support!
Exeter,Missouri Ductless Mini-Split AC Installation
CALL NOW FOR A QUOTE:
Mini-Split AC Systems Sales Growth Is Slowing
Some larger VRF-style commercial systems continue to grow at higher rates, but their numbers in the U.S. remain a fraction of the market at only 28,000 units per year.
A bright small bright spot for the segment can be seen with accelerated growth in denser urban areas.
While the ductless segment has put up impressive growth rates in the U.S. since 2005, the growth rates have been slowing recently and the largest ductless segment (small, single evaporator systems) have not grown at all since 2010. These sales remain stable at about 260,000 units per year, or only about 4% of total unitary AC shipments.
Range for Costs Associated With A Mini-Split Installation in Exeter, Missouri
The process and materials associated with installing a ductless air conditioning system is the same no matter the project. However, like anything else the actual total cost will vary on the complexity of the job and labor costs in your area.
Here is a quick guide to help you understand the range of pricing for a mini-split installation throughout the U.S.
A ductless mini-split air conditioning system could cost $2,000 to $14,000.
They run at an average of $3,000 for a 12,000 BTU system. While a one-ton unit with one outdoor and one indoor component at 21 SEER rating runs $1,000 to $4,000 depending on the brand and type of indoor mount.
Labor costs add an additional $300 to $1,000 or more depending on the complexity of the installation.
In general, mini-split systems run about 30% more than a new ducted system and more than twice as much as a single window AC.
You may also need to install a concrete pad to mount the exterior unit for an additional cost and a dedicated electrical circuit for the added expense. Older homes may require an upgraded electrical panel costing 1100 to 2500, however, that could be the case for conventional systems as well.
If you would like an estimate on the specific cost of installing a ductless mini-split system in your home in 65647 area Call:
Disadvantages Of Mini Split Ac Systems
Mini Split Systems have a lot of positives, but nothing comes without drawbacks. Something to consider is that it has been reported that these units can be less energy efficient than forced-air systems like central air conditioning.
Also, not all homes are a perfect fit for mini split AC Systems. You should consult a qualified HVAC provider before deciding which type of heating and cooling system is right for your property. They can assess your home’s configuration, the available space, and determine if a ductless system can be installed correctly and efficiently.
Also, you should understand if you are comfortable with the space and esthetic requirements of a mini-split system as well as the increased maintenance before making any decision.
Ductless AC Vs. Central AC
If you already have ductwork in place, it pays to compare the pros and cons of mini-split units to more traditional central AC Units.
Ductless Mini Split AC Units
- Mini Split AC Units present significant savings if you do not have ducts in place.
Mini-split systems are easier to install than central AC units.
Mini-splits can provide both cooling and heating.
Ductless air conditioners are more energy-efficient than central AC units.
Some people think min split AC units are ugly and take away from the interior design.
- Central AC
For the most accurate cooling throughout the home, central AC is the way to go.
If you do not have ductwork in place, your total installation cost will be very high.
The system can last up to 20 years with proper maintenance.
Central air conditioners can be less expensive to run after installation.
If you would like an estimate on installing a ductless mini-split system in ExeterCALL:
CALL NOW FOR A QUOTE:
The Ductless Mini-Split AC Installation Process
You may be wondering what it takes to install a Mini-Split AC to see just how involved the process is. Now, realize that no-two installations are exactly the same. So, we couldn’t possibly layout an exact installation process for your home without knowing specifics of the job, like layout and placement of the unit.
But we can layout the general process for you so you can get an idea of what a typical installation entails. At a high level, this is what will have to be done to install a Mini-Split AC.
- Install the condenser
- Add evaporator mount
- Mount the evaporator
- Connect the evaporator to the condenser
- Cover the lines
- Make final connections
Some areas may need a permit, please check with your local municipality to see if permits are required in Exeter, Missouri. Or CALL 855.925.0760 for a QUOTE and more information on what a Mini-Split AC|Ductless AC|Ductless Mini-Split AC|Mini-Split AC System|Ductless Mini-Split AC System} installation project looks like for your home.
Perks Of A Ductless AC & Heating System
The first we already mentioned, homeowners who do not already have ductwork in their homes, will not have to worry about retrofitting your existing home with the appropriate duct and ventilation work.
This will ultimately save you lots of money. Also, since these ductless heating and air conditioning systems do not have to have a lot of complex wiring and tubing, they tend to take less time to install, bringing down the average cost to install a mini-split AC system.
Another great aspect of a mini-split air conditioner is the fact that they can be installed to maximize your home. For example, one condenser may have as many as four evaporators connected to it, all of which can serve different rooms around the home. These evaporators can be independently controlled, which is great for keeping electric costs down. For example, if a homeowner wants to cool a single room in the home, all you have to do is turn off the evaporators to the in unwanted areas of the home.
Finally, unlike a window AC unit, give you extra peace of mind as they don’t have to be installed in a window, which can cause a common entry point for intrudors.
If you would like an estimate on installing a mini-split AC system in 65647CALL 1.855.920.1857
Mini Split AC System Types
When choosing a mini-split AC system, homeowners need to decide which unit is best for them In general, there are two common types of mini splits:
- Single Zone
- Multiple Zone
Single zone units are less expensive, but are most often only used to cool a single room of a home. These are ideal for smaller spaces such as studio apartments.
However, multiple zone units are made to cool several rooms within a home. These also tend to be more costly, as the capacity for these systems must be higher and more powerful.
If you would like an estimate on installing a single or multiple zone mini-split AC system in 65647 Call: 1.855.920.1857
Where Can You Install Mini Splits?
The spot of your mini split AC system should definitely be thought of proceeding your purchase. Luckily , you can install your mini split AC system in various areas.
Ductless AC Units can be attached to your ceiling or wall. High up on the wall is most common, but as of most recently, more homeowners are disguising them in the ceiling. If you choose to install your mini split AC unit in the ceiling, you can have it suspended, recessed or concealed. As you might imagine, recessed or concealed units are very popular for smaller units. The less noise in the room, the bigger it will feel.
If you would like an estimate on installing a single or multiple zone mini-split AC system in 65647 CALL: 1.855.920.1857
What is a SEER rating and How Does it Affect Cost?
The SEER, or Seasonal Energy Efficiency Ratio, change the final cost. The higher the SEER rating the more efficient the unit.
If you are someone that wants to keep their operating costs to a minimum or want to conserve energy then a higher SEER rating is the way to go. The higher ratings translate into lower energy costs but also higher unit prices. These ratings vary from the federally regulated minimum of 13 up to 26+. Trane heat pump mini-splits have ratings as high as 38. So, while picking a unit with higher SEER rating will increase the cost of the installation it will lower the cost of operation over the life of the ductless AC system
If you would like an estimate on the specific cost of installing a ductless mini-split system with different SEER ratings, for your home in Exeter Missouri; Call:1.855.920.1857
Why Is Mini-Split System BTU Important? And What Do I Need?
Just like a traditional HVAC system, BTU’s determine the size of the area that a system can cool. Whether you are installing a conventional or mini-split system, you need to make sure that you are installing a heating and cooling system that can provide the temperature control the size of your space.
The only way to know exactly how many BTUs your unit needs to be is to consult with an HVAC contractor in your area, as it may depend on other factors like the placement of the unit, climate, insulation, etc. For a rough estimate, you can calculate 17 to 24 BTUs per square foot of the desired living space.
But here are general guidelines to give you an idea on the number of BTUs your ductless mini-split heating and cooling system may need to cover your living space.
Area To Be Cooled (SF) Unit Size Capacity (BTUs Per Hour)
700 – 1,000 1.5 Tons 18,000
1,000 – 1,200 1.5 or 2 Tons 21,000
1,200 – 1,400 2 Tons 23,000
1,400 – 1,500 2 – 2.5 Tons 24,000
1,500 – 2,000 2.5 Tons 30,000
2,000 – 2,500 3 Tons 34,000
3,000 – 4,000 4 Tons 48,000
5,000+ 5 Tons 60,000
If you would like an estimate on installing an energy-efficient mini-split AC system in 65647 Call:
Providing Ductless AC Installation In Exeter, Missouri
Also Serving Near By Cities
Mini-Split AC Installation Shell Knob, Missouri, 65747
Mini-Split AC Installation Eagle Rock, Missouri, 65641
Mini-Split AC Installation Purdy, Missouri, 65734
Mini-Split AC Installation Monett, Missouri, 65708